BECKHOFF倍福模塊經銷

更新時間：2018-03-21

瀏覽次數：1584

上海勇控自動化設備有限公司主營BECKHOFF倍福，PILZ皮爾茲安全繼電器。

德國倍福自動化有限公司的總部位于德國威爾市。公司在世界各地設有分支機構，加上的合作伙伴，目前公司業務已遍及60多個國家。
倍福始終以基于PC的自動化新技術作為公司的發展理念，所生產的工業電腦、現場總線模塊、驅動產品和TwinCAT控制軟件構成了一套完整的、相互兼容的控制系統，可為各個工控領域提供開放式自動化系統和完整的解決方案。近20年來，倍福公司的元件和系統解決方案在世界各地得到了廣泛的應用。

端子模塊型號

KL6831	Bus Terminal	SMI master terminal, LoVo
KL6841	Bus Terminal	SMI master terminal, 230 V AC
KL6904	Bus Terminal	TwinSAFE Logic Bus Terminal with 4 digital outputs 24 V DC, 0.5 A
KL8001	Bus Terminal	Power terminal for Siemens contactor series Sirius 3R
KL8500	Bus Terminal	Placeholder module
KL8519	Bus Terminal	16-channel digital input signal module, 24 V DC, IEC 61131-2, type 3, filter 3.0 ms with manual operation
KL8524	Bus Terminal	4 x 2-channel digital output module, 24 V DC, 0.5 A with manual operation
KL8528	Bus Terminal	8-channel digital output module, 24 V DC, 0.5 A with manual operation
KL8548	Bus Terminal	8-channel analog output module, 0…10 V, 12 bit with manual operation
KL8601	Bus Terminal	Communication module for Schneider TeSys model U
KL8610	Bus Terminal	Adapter terminal for TeSys model U, KL8601
KL9010	Bus Terminal	Bus end terminal
KL9020	Bus Terminal	Terminal bus extension, end terminal at KL9050
KL9050	Bus Terminal	Terminal bus extension, coupler terminal from KL9020 or KL9050
KL9060	Bus Terminal	Adapter terminal for KL8xxx power terminals
KL9070	Bus Terminal	Shield terminal, 8 x shield
KL9080	Bus Terminal	Isolation terminal
KL9100	Bus Terminal	Power supply terminal, 24 V DC
KS9100	Bus Terminal	Power supply terminal, 24 V DC
KL9110	Bus Terminal	Power supply terminal with diagnostics, 24 V DC

控制器

CX9000-0000	Embedded PC	Basic CPU module CX9000, 16 Mbyte Flash/64 Mbyte RAM, E-bus, no TwinCAT
CX9000-0001	Embedded PC	Basic CPU module CX9000, 16 Mbyte Flash/64 Mbyte RAM, E-bus, TwinCAT 2 PLC run-time
CX9001-0000	Embedded PC	Basic CPU module CX9000, 32 Mbyte Flash/128 Mbyte RAM, E-bus, no TwinCAT
CX9001-0001	Embedded PC	Basic CPU module CX9000, 32 Mbyte Flash/128 Mbyte RAM, E-bus, TwinCAT 2 PLC run-time
CX9001-0100	Embedded PC	Basic CPU module CX9000, 32 Mbyte Flash/128 Mbyte RAM, DVI/USB, E-bus, no TwinCAT
CX9001-0101	Embedded PC	Basic CPU module CX9000, 32 Mbyte Flash/128 Mbyte RAM, DVI/USB, E-bus, TwinCAT 2 PLC run-time
CX9000-1000	Embedded PC	Basic CPU module CX9000, 16 Mbyte Flash/64 Mbyte RAM, K-bus, no TwinCAT
CX9000-1001	Embedded PC	Basic CPU module CX9000, 16 Mbyte Flash/64 Mbyte RAM, K-bus, TwinCAT 2 PLC run-time
CX9001-1000	Embedded PC	Basic CPU module CX9000, 32 Mbyte Flash/128 Mbyte RAM, K-bus, no TwinCAT
CX9001-1001	Embedded PC	Basic CPU module CX9000, 32 Mbyte Flash/128 Mbyte RAM, K-bus, TwinCAT 2 PLC run-time
CX9001-1100	Embedded PC	Basic CPU module CX9000, 32 Mbyte Flash/128 Mbyte RAM, DVI/USB, K-bus, no TwinCAT
CX9001-1101	Embedded PC	Basic CPU module CX9000, 32 Mbyte Flash/128 Mbyte RAM, DVI/USB, K-bus, TwinCAT 2 PLC run-time
CX1900-0102	Embedded PC	Spare battery suitable for CX10x0, CX50x0, CX51x0, CX90x0, CX20x0 – lithium button cell type CR2032, 3V/225 mAh – follow polarity when installing
CX9000-N010	Embedded PC	Interface module for DVI+USB connection – 2D graphics controller: min. resolution 320 x 240, max. 1280 x 1024 (Beckhoff 19" panels) – standard DVI connector (max. 5...7 m cable length, resolution dependant) – DVI connector includes VGA signals (simple adaptor connects to desktop standard CRT-VGA monitors) – 2 x USB 2.0 ports type A – pre-assembled ex factory, cannot be upgraded – protection class IP 20 – operating/storage temperature: 0 °C ... +55 °C/-25 °C ... +85 °C – weight approx. 80 g – dimensions (W x H x D) 19 x 100 x 51 mm
CX9000-N030	Embedded PC	Interface module for 2 x RS232 connections (COM1 + COM2) – full 115 kbaud on both channels – electrically isolated interfaces (optically isolated) – COM1: RXD, TXD, RTS, CTS – COM2: RXD, TXD, RTS, CTS – pre-assembled ex factory, cannot be upgraded – protection class IP 20 – operating/storage temperature: 0 °C ... +55 °C/-25 °C ... +85 °C – weight approx. 80 g – dimensions (W x H x D) 19 x 100 x 51 mm
CX9000-N031	Embedded PC	Interface module for 2 x RS422/RS485 connections optically isolated (COM1 + COM2) – full 115 kbaud on both channels – electrically isolated interfaces (optically isolated) – modes: RS485: with/without echo, with/without termination, RS422: full duplex – COM1: RXD, TXD, RTS, CTS – COM2: RXD, TXD, RTS, CTS – may not be used at the same time with CX9000-N030 – pre-assembled ex factory, cannot be upgraded – protection class IP 20 – operating/storage temperature: 0 °C ... +55 °C/-25 °C ... +85 °C – weight approx. 80 g – dimensions (W x H x D) 19 x 100 x 51 mm
CX9000-N070	Embedded PC	Extension module for 4 USB ports – 4 x USB 2.0 ports type A, current output max. 500 mA – suppports USB 1.1 and USB 2.0 standard – transfer rates: 1.5 Mbit/s, 12 Mbit/s and 480 Mbit/s – for field assembly – protection class IP 20 – operating/storage temperature: 0°C ... +55°C/-25°C ... +85°C – weight: ca. 80 g – dimensions (W x H x D): 19 x 100 x 51 mm
CX9000-A001	Embedded PC	Extension module for usage of a mass storage Compact Flash card – Compact Flash card slot for cards type I and II – front LED indicators for: PWR (power), LOCK (card inserted) and CF (access) – protection class IP 20 – operating/storage temperature: 0 °C ... +55 °C/-25 °C ... +85 °C – weight approx. 80 g (without CF card) – dimensions (W x H x D) 19 x 100 x 51 mm
CX9010	Embedded PC	Modular DIN rail Industrial PC – 533 MHz In® IXP420 CPU with XScale® technology – 32 MB internal flash memory (bootable, not expandable) – 128 MB internal RAM (not expandable) – 128 kb non-volatile RAM (NOVRAM) – clock: internal battery-backed clock for time and date, exchangeable battery – two RJ45 Ethernet connector 10/100 Mbit (integrated switch) – diagnostics LED: Power, LAN1 Link/Act, LAN2 Link/Act, K-bus Run/Err resp. L/A (EtherCAT Link/Act), and HDD access – I/O interface: K-bus or E-bus – operating system: Microsoft Windows CE – max. power loss: 7 W (including CX901x-xxxx system interfaces) – protection class IP 20 – operating/storage temperature 0 °C ... +55 °C/-25 °C ... +85 °C – weight approx. 250 g – dimensions (W x H x D) 59 x 100 x 91 mm – 'U' = placeholder for the direct I/O interface type: 0 = on-board E-bus (Beckhoff EtherCAT Bus Terminals) interface 1 = on-board K-bus (Beckhoff Bus Terminals) interface – 'C' = placeholder for the system interface connector options: 0 = preequipped with CX9010-N000 = 2 x Ethernet RJ45 connector (internal switch) + battery compartment 1 = preequipped with CX9010-N000 = 2 x Ethernet RJ45 connector (internal switch) + battery compartment + CX9010-N010 = DVI connector and 2 x USB port connectors – 'T' = placeholder for the TwinCAT software level options: 0 = no TwinCAT software installed 1 = preequipped with TwinCAT 2 PLC licence 2 = preequipped with TwinCAT 2 NC licence Please refer to the following table listing for the order numbers of the various valid combinations.
CX9010-0000	Embedded PC	Basic CPU module CX9010, E-bus, no TwinCAT
CX9010-0001	Embedded PC	Basic CPU module CX9010, E-bus, TwinCAT 2 PLC run-time
CX9010-0002	Embedded PC	Basic CPU module CX9010, E-bus, TwinCAT 2 NC run-time
CX9010-0100	Embedded PC	Basic CPU module CX9010, DVI/USB, E-bus, no TwinCAT
CX9010-0101	Embedded PC	Basic CPU module CX9010, DVI/USB, E-bus, TwinCAT 2 PLC run-time
CX9010-0102	Embedded PC	Basic CPU module CX9010, DVI/USB, E-bus, TwinCAT 2 NC run-time
CX9010-1000	Embedded PC	Basic CPU module CX9010, K-bus, no TwinCAT
CX9010-1001	Embedded PC	Basic CPU module CX9010, K-bus, TwinCAT 2 PLC run-time
CX9010-1002	Embedded PC	Basic CPU module CX9010, K-bus, TwinCAT 2 NC run-time
CX9010-1100	Embedded PC	Basic CPU module CX9010, DVI/USB, K-bus, no TwinCAT
CX9010-1101	Embedded PC	Basic CPU module CX9010, DVI/USB, K-bus, TwinCAT 2 PLC run-time
CX9010-1102	Embedded PC	Basic CPU module CX9010, DVI/USB, K-bus, TwinCAT 2 NC run-time
CX1900-0102	Embedded PC	Spare battery suitable for CX10x0, CX50x0, CX51x0, CX90x0, CX20x0 – lithium button cell type CR2032, 3V/225 mAh – follow polarity when installing
CX9010-N010	Embedded PC	Interface module for DVI/VGA+USB connection – 2D graphics controller: min. resolution 320 x 240, max. 1280 x 1024 (Beckhoff 19" panels) – standard DVI connector (max. 5...7 m cable length, resolution dependant) – DVI connector includes VGA signals (simple adaptor connects to desktop standard CRT-VGA monitors) – 2 x USB 2.0 ports type A – pre-assembled ex factory, cannot be upgraded – protection class IP 20 – operating/storage temperature: 0 °C ... +55 °C/-25 °C ... +85 °C – weight approx. 80 g – dimensions (W x H x D) 19 x 100 x 51 mm

自2001年3月德國倍福成立北京代表處以來，公司在中國的業務迅速發展,先后成立了上海代表處和廣州代表處。隨著各種具有良好性價比的新產品、新技術不斷進入中國市場，其勇于打破傳統控制模式，傾力推廣PC控制新技術的理念已被越來越多的中國用戶所接受。
總線端子

目前，通常用電纜線將 I/O 信號傳送到分布式現場總線設備或控制器上進行集中控制。而從市場上采購到的來自不同廠家的現場總線設備一般具有固定的輸入/輸出配置和設計，因此往往需要安裝帶有類似功能的一整套設備。這種昂貴的信號采集方法一方面會增加材料、安裝、規劃和文件制作等方面的成本，并且在后期改造或系統擴展方面也會增加投入，而且還會增加庫存管理人員以及維修人員不必要的工作強度

靈活而穩定

Beckhoff 總線端子是一種獨立于現場總線的開放式I/O系統，由電子端子排組成。電子端子排的核心是帶現場總線接口的總線耦合器。總線耦合器可用于以下總線系統：

EtherCAT, 實時以太網現場總線；
Lightbus, 用于快速通訊；
PROFIBUS DP/FMS 符合 EN 50170 歐洲標準；
Interbus, 于1987 年進入市場；
CANopen, 用于執行器/傳感器領域的多主站總線；
DeviceNet, 采用 CAN 技術的設備總線；
ControlNet, 標準化現場總線；
Modbus, 開放式現場總線；
Fipio, WorldFIP 標準現場總線；
CC-Link, 適用于亞洲市場的現場總線
SERCOS interface, 來自驅動工程領域的總線；
RS232/RS485, 的解決方案網絡；
Ethernet TCP/IP, 網絡總線；
Ethernet/IP, ODVA 的工業以太網解決方案；
PROFINET, PROFINET，來自 PNO 的工業以太網解決方案;
USB, 實驗室用快速接口。
采用主站端子，可以總線端子的形式實現現場總線功能。這對于在上位系統中集成了子系統的總線系統來說非常有益。這也就意味著子系統及上位總線系統僅需一個系統接口。主站端子可用于以下總線系統：

AS-Interface, 用于下位控制級的傳感器/執行器總線；
EIB, LON, DALI, 用于樓宇自動化的通訊標準；

自動化標準

采用 Beckhoff 總線端子后，可把控制柜和安裝端子的端子盒設計得更加經濟。通過采用 4 線制端子系統，各種信號的傳感器和執行機構都可以直接連接，而無需其它連接系統。現場設備無需像以往那樣在控制柜（或端子盒）與控制器之間作點對點的連接，這樣可大大減少控制器的設計成本，節約空間、材料、工程量和資金。
現場設備可以通過 Beckhoff 總線端子系統在產生信號的現場進行連接，因此對 Beckhoff 總線端子的安裝和布線就像標準端子排那樣簡易和緊湊。總線端子與控制器之間通過一個現場總線耦合器連接。
Beckhoff 總線端子已在許多領域得到了測試和驗證，從機械制造到樓宇控制。采用 Beckhoff 總線端子，可使設計、基建、布線、調試安裝以及對系統和設備的維護和維修變得更加經濟。
現場總線